焊接作业环境中蓝光职业接触限值的研究:基于ICNIRP指南和人眼成像原理

Occupational exposure limits for blue light in welding environments: Based on ICNIRP guidelines and human eye imaging principles

  • 摘要:
    背景 蓝光作为一种职业危害因素,广泛存在于焊接及相关的工作环境中,但我国职业卫生标准尚未制定焊接作业环境中的蓝光接触限值。
    目的 本研究旨在研究并提出焊接作业环境中的蓝光接触限值,为焊接作业中蓝光危害和最大允许暴露时间的评估提供参考依据。
    方法 对焊接作业环境中的弧光及其所产生的蓝光辐射进行研究,分析国际非电离辐射防护委员会(ICNIRP)发布的非相干光辐射防护指南,结合焊接作业中弧光的大小、焊工眼睛与弧光的距离以及人眼瞳孔直径等因素,依据人眼成像的几何光学原理和能量守恒原理,推导出人眼视网膜辐照度与焊接弧光辐亮度之间的函数关系。然后将ICNIRP发布的蓝光辐亮度限值(100 W·m−2·Sr−1)代入上述函数,计算焊接作业环境中的蓝光辐照度接触限值。
    结果 焊接作业环境中的蓝光辐照度接触限值( E_\rmB^\rmEL )为3 W·m−2。考虑到焊接作业具有高重复性的特点,其蓝光辐照量的接触限值( H_\rmB^\rmEL )为60 J·m−2。根据辐照量和辐照度的定义,一个工作日内最大允许暴露时间按公式 t_\mathrmm\mathrma\mathrmx=H_\rmB^\rmEL/E_\rmB 计算,其中 E_\rmB 为焊接作业环境中实测蓝光辐照度。
    结论 本研究推导出的蓝光辐照量接触限值,对评估焊接作业中的蓝光危害和最大允许暴露时间提供了重要依据和方法,也为我国蓝光职业接触限值标准的制定提供参考。

     

    Abstract:
    Background Blue light, as an occupational hazard, is widely present in welding and related work environments. However, China's occupational health standard system has not yet established any limit for blue light exposure in welding work environments.
    Objective To study and propose blue light exposure limits in welding operation environments, and provide a reference for evaluation of blue light hazard and maximum allowable exposure time in welding operations.
    Methods A function between retinal irradiance and welding arc radiance was introduced by studying arc light and blue light radiation generated in welding operation environments, analyzing the incoherent light radiation protection guidelines issued by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), and combined with factors such as the size of arc light in welding operations, the distance between the welder's eyes and the arc light, and the diameter of the human eye pupil, as well as the geometric optics principle of human eye imaging and the conservation of energy. Then, the radiance limit (100 W·m−2·Sr−1) issued by ICNIRP was input into the above function to calculate the blue light irradiance exposure limit in the welding operation environments.
    Results The blue light irradiance exposure limit in the welding operation environments ( E_\rmB^\rmEL ) was 3 W·m−2. Considering the high repeatability of welding operations, the exposure limit for blue light radiant exposure ( H_\rmB^\rmEL ) was 60 J·m−2. According to the definitions of radiant exposure and irradiance, the maximum allowable exposure time within one working day was calculated according to the formula t_\mathrmm\mathrma\mathrmx=H_\rmB^\rmEL/E_\rmB , in which E_\rmB was the measured blue light irradiance in a welding environment.
    Conclusion Exposure limits of radiant exposure for blue light are proposed to provide important references for evaluating the hazards and maximum allowable exposure time of blue light in welding operations, and for future development of occupational exposure limit standards for blue light in China.

     

/

返回文章
返回